Car Audio Geek » Car Electronics » Hertz
Hertz car electronics
Hertz DCX690
- 6x9 Inch 180 Watt 4 Ohm 3 Way Coaxial Car Audio Speakers
- Peak power handling: 180 watts
- Continuous power handling: 90 watts
- Impedance: 4 ohms
- Frequency response: 45Hz- 21kHz
- Sensitivity: 93 dB
- Model: DCX690.3
- Color: Black
Hertz MLK1650.3
- Mlk 1650.3 2-Way Kit
- Power Handling: 300 Watts Max | Power Handling: 150 Watts RMS | Impedance Ohm: 4
- Frequency response Hz: 40 | Sensitivity dB SPL: 92 | Voice coil Ø mm (in.): Woofer 36 (1.4) Tweeter 28 (1.1)
- Woofer size mm (in.): 165 (6.5) | Tweeter size mm (in.): 28 (1) | Woofer magnet: Neodymium
- Tweeter magnet: Neodymium | Woofer cone: Pressed-pulp cone with cotton fibres | Tweeter dome: Tetolon
- Crossover type: 2 Way Passive Crossover | Crossover cut off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF)
Hertz HM RGB 1 BK
- CONTROLLER for HMX 6.5 LD/HMX 6.5-LD-C
- The HM RGB 1 BK enhances your experience with multicolor LED lighting that can be changed to fit your mood or craft. Is composed by an RGB CONTROLLER specifically developed for HMX LD option models including a radio frequency remote control with a wide array of functionalities ranging from the selection of the color better matching your boat/ATV/motorcycle to the creation of a lighting game reacting to music tempo.
Hertz ECX-165
- 2 Sets of ECX-165.5 6.5" 420W 2-Way Coaxial Speakers
- Power Handling: 420W Peak | 140W RMS
- Impedance: 4-Ohms
- Frequency Response: 60 ÷ 23kHz
- Sensitivity: 94 dB SPL
- Mounting Depth: TBD
- Model: PAIR-ECX-165.5
Hertz HSK 130.4
- 130 5.25" 2-WAY HI-ENERGY COMPONENT SPEAKERS MIDS TWEETERS CROSSOVERS
- HSK130
- HSK-130
- Hertz
- Component
- Speakers
Hertz Et26
- Neodym Tweeter Set 5, 26.5 Mm Tweeters
- Specifications: 1" Tweeter, Power Handling: 150W Peak/Continuous (Hi-Pass altered at 3,5 kHz - 12 dB Oct.). Impedance: 4-Ohm, Frequency response: 2k-23kHz, Sensitivity: 92 dB SPL, Voice coil: 0.8", Neodymium Magnet, Tetolon Dome.
- Features: Tetolon dome, with hemispheric profile and wide roll surround; extremely light weight and properly damped for smooth and extended high frequency response. Acoustic compression chamber; high efficiency and off-axis optimized response. CCAW (Copper Clad Aluminium Wire) ultra light ferrofluid-cooled mobile voice coil. High energy neodymium magnet. Low carbon content plates for maximum magnetic permeability and high heat dissipation. Damping material; controlling acoustic resonances insuri
- Model: ET26.5
Hertz MPX690
- 6x9-Inch 3-Way Car Audio Speakers
- Peak power handling: 260 watts
- Continuous power handling: 130 watts
- Impedance: 4 ohms
- Frequency response: 30Hz - 24kHz
- Sensitivity: 94 dB
- Model: MPX690.3
- Color: Black
Hertz HCP 1DK
- Mono Car Amplifier
- 4 ohms: 740 watts x 1 chan
- 2 ohms: 1240 watts x 1 chan
- Max power output: 2480 watts
- Class D
Hertz ESK-165L
- ESK-165L.5 - Hertz 6.5" 300W Peak 2-Way Component Speaker System
- EV 165L.5 165mm (6.5") Woofer, ET 26.5 26mm (1") Neodymium Tweeter, andCX 200.5 Crossover LP/HP at 3kHz - 6/12 dB
- V-cone® for best off-axis response and clear mid-high frequency detail.
- Water-repellent non-pressed paper cone provides deep, tight and dynamic bass output.
- Mounting Depth: 2.56"
Hertz DSK 130.3
- Power Handling: 60W RMS | 120W Peak | 4-Ohm Impedance | Sensitivity: 93dB SPL | Hi Pass Crossover | Crossover Cut-Off: 3.5 kHx at 12dB Oct | Mounting Depth: 2"
- DT 24.3 - 24mm PEI dome-cone tweeter | High efficiency annular acoustic lens | High energy REN Neodymium magnet | Mounting accessories for external or embedded mounting included
- DV 130.3 - Large motor assembly for mobile voice coil control | Pure copper voice coil, wound on Conex former, for maximum lightness | V-cone for best off-axis response, clear mid-high frequency detail and powerful bass
- TPU surround, for wide excursion and resonance damping | DIN size basket protected by abrasion-proof dust paint | Tin-plated, high current terminals | Silver-plated lead wires for maximum reliability and conductivity
- Butyl rubber protective cover, against crashes and abrasions | Epoxy glue for basket and motor system provides perfect coupling | Low carbon content plates for maximum magnetic permeability and high heat dissipation
