Car Audio Geek » Car Electronics » Hertz
Hertz car electronics
Hertz HSK165
- 165 6.5" 2-way Hi-Energy Component Speaker System
- HSK-165 - Hertz 6.5" 250W Peak 2-Way Component Speaker System
- Power Handling: 250W Peak | 125W RMS
- 25mm (1") HT 25 Neodymium REN Tweeter
- 165mm (6.5") HV 165 Woofer DIN
- Crossover: LO/Hi-pass 3.2kHz at 12/12 dB Oct.
Hertz MPX690
- 6" x 9" 130 Watts RMS 3-Way Coaxial Speakers
- Power Handling: 260 Watts Peak | 130 Watts RMS | Impedance: 4-Ohm
- Frequency response: 30 ÷ 24k Hz | Sensitivity: 94dB SPL | Woofer size mm (in.): 6 x 9
- Tweeter size mm (in.): 35 (1.4) | Supertweeter size mm (in.): 29 (1.14) | Woofer Voice Coil Ø mm (in.): 38 (1.5)
- Tweeter voice coil Ø mm (in.): 28 (1.1) | Woofer magnet: High density flux ferrite | Tweeter magnet: Neodymium
- Woofer cone: Pressed-pulp cone with cotton fibers | Tweeter dome: Tetolon | Supertweeter dome: Tetolon | Top Mount Depth: 3.54"
- Model: MPX690.3 PRO
Hertz DCX690.3
- DCX-690.3 3-Way Car Speakers
- Power Handling: 180W Max / 90W RMS
- 4-Ohm Impedance
- Large motor assembly for mobile voice coil control.
- Color: Black
Hertz MPX690
- MPX690.3 Mille PRO Coaxial Speakers
- Peak power handling: 260 watts
- Continuous power handling: 130 watts
- Impedance: 4 ohms
- Frequency response: 30Hz - 24kHz
- Sensitivity: 94 dB
- Model: 071027
- Color: Black
Hertz ST35
- 1.4" 100W RMS High Efficiency Compression Driver Bullet Tweeters
- CCAR (Copper Clad Aluminium Ribbon) voice coil | Extra-light aluminium membrane with high thermal dissipation | Anodized aluminium body, for maximum damping and vibration rejection.
- 44 mm (1.7 in.) voice coil | Ferrite magnet
- Power Handling: 100W Peak | Impedance: 4-Ohm
- Frequency Response: 2,5k ÷ 20k Hz | Sensitivity: 109 dB/SPL
- Magnet: Neodymium | Cone/Dome: Aluminium
- Model: ST 35
Hertz ECX-570
- ECX-570.5 - Hertz 5" x 7" 105W RMS 2-Way Energy Series Coaxial Speaker
- Power Rating: 210W Max
- Water-repellent treated paper cone, butyl rubber surround.
- Pure copper voice coil wound on aluminum former, for very good thermal and mechanical capacity.
- Mounting Depth: 2.56"
- Model: ecx 570.5
Hertz DCX 87.3
- DCX 87.3 - Hertz 3" 2-Way 60W Max DIECI Series Coaxial Speakers
- Power Handling: 30 Watts RMS | 60 Watts Peak Power
- 4 Ohm Impedence
- Large motor assembly for mobile voice coil control.
- Mounting Depth: 1.3"
Hertz ESK-163L
- ESK-163L.5 - Hertz 6.5" 375W Peak 3-Way Component Speaker System
- EV 165L.5 165mm (6.5") Woofer
- ET 26.5 26mm (1" Neodymium Tweeter
- EMV 100.5 100m (4") Midwoofer
- CX300.5 Crossover LP/BP/HP at 600Hz - 12/6 dB Oct. 6 kHz - 6/12 dB Oct.
Hertz Hcp4D
- Hert z D-Klass Stereo Amplifier Power Amplifier 4 X 145 Watt
- RMS output power: 85 watts x 4 at 4 ohms, 145 watts x 4 at 2 ohms, 290 watts x 2 at 4 ohms bridged
- Minimum bridged impedance: 4 ohms
- Channel modes: 4, 3, or 2
- CEA-2006 compliant
- Bypass filter: Yes
- Model: HCP-4D
- Color: Black
Hertz 02050MLPOWER4
- ML POWER 4 4-Channel Class D Amplifier
- 4-Channel Car Amplifier
- 4 ohms: 85 watts x 4 chan
- 2 ohms: 145 watts x 4 chan
- Bridged
- 4 ohms: 290 watts x 2 chan
