Car Audio Geek » Car Electronics » Polk Audio
Polk Audio car electronics
Polk Audio DB1242DVC
- DB+ Series 12" Dual Voice Coil Subwoofer
- Polk Audio DB1242DVC 12" 1110 Watt Dual 4-Ohm Car/Marine Audio Subwoofer Sub. Driver Compliment: 12" (304.8mm). Cutout Dimensions: 11" (282mm).
- Mounting Height: 0.51" (13.05mm). Mounting Depth (Top): 4.34" (110mm). Mounting Depth (Bottom): 4.56" (116mm). Peak Power Handling: 1110 Watts.
- Continuous Power Handling: 370 Watts. Nominal Impedance: 4 Ohms. Frequency Response: 26Hz-200kHz. Sensitivity: 86 dB.
- Magnet Weight: 47.4 oz. Magnet Material: Ceramic. Magnet Size: 145mm x 60mm x 20mm. VC Diameter: 2". Minimum Sealed Enclosure: 1.25 cu. ft.
- Maximum Sealed Enclosure: 3.5 cu. ft.. Minimum Vented Enclosure: 1.75 cu. ft.. Maximum Vented Enclosure: 2.25 cu. ft.
4 x Polk Audio DB+ Series 4-Inch 4" 2-way Car Boat Marine Audio UTV Coaxial Speakers 135W
- 4 x Car Boat Marine Audio 4-inch 2-way coaxial Speakers
- RMS: 90 watts per pair / 45 watts each | Peak: 270 watts per pair / 135 watts each
- Recommended Power Range: 15 - 45 watts RMS per channel | Frequency Response: 60-22,000 Hz | Sensitivity: 90dB
- Waterproof inner and outer surround
- Top-mount Depth: 1.79" | Cutout Dimensions: 4.09"
Polk Audio 1 pair
- 2 driver speakers (tweeter is not included and is sold separately)
- 6.5 inch. Both come with white grills included as seen in the picture.
- The weather won't affect the sound quality since the components are equipped with an analyzer. This analyzer system makes strategic adjustments whenever it detects distortion.
- The product's high power range makes this possible; while at peak power, the unit can produce 250 watts. As different notes and effects are processed through the hardware, sound quality won't drop. Thanks to the high frequency response and 94 dB sensitivity level, effects can be balanced during every song.Each speaker is oversized and has a woven glass coating that can enhance sounds. The housing is made out of a space age material, so the hardware can function when the temperature drops.
- These mobile speakers can fit nicely in a vintage car cabin because they have a depth of 2-5/8 inches. The grille bundled with this kit is only 1-1/16 tall, so you can mount it in a compact spot.
Polk Audio MM842DVC
- 8 900w DVC Car Subwoofer Sub+Mono Amplifier+Amp Kit
- Package Includes : Polk Audio MM842DVC 8" 900 Watt Dual 4-Ohm Car or Marine Subwoofer + Rockville dB12 2000 Watt Peak 1000 Watt RMS Mono Class D Car Amplifier + Rockville RWK41 4 Gauge 2 Channel Complete Wire Kit With RCA Cables
- Polk Audio MM842DVC 8" 900 Watt Dual 4-Ohm Car/Marine Boat Audio Subwoofer Sub . Driver Compliment: 8" (203.2 mm). Cutout Dimensions: 7.2" (185mm). Mounting Height: 0.55" (14.06mm). Mounting Depth (Top): 4" (105mm). Mounting Depth (Bottom): 4.68" (119mm). Peak Power Handling: 900 Watts. RMS Continuous Power Handling: 300 Watts. Nominal Impedance: 4 Ohms. Frequency Response: 30Hz-200kHz. Sensitivity: 85 dB.
- Rockville dB12 2000 Watt/1000w RMS Mono Class D 2 Ohm Amplifier . CEA Compliant Power Ratings. 2 Ohm: 500 Watts x 1 Channel <1% THD+N. 4 Ohm: 300 Watts x 1 Channel <1% THD+N. RMS Power Ratings:. 2 Ohm: 1000 Watts x 1 Channel. 4 Ohm: 600 Watts x 1 Channel. Peak:. 2 Ohm: 2000 Watts x 1 Channel. 4 Ohm: 1200 Watts x 1 Channel. High-Speed MOSFET Power Supply. Designed, Engineered, Developed, and Quality Controlled in the USA.
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch 0-180 degrees. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. RCA Line Input (This is to connect the amplifier to your receiver).
- 1 - 17' High Grade Twisted Pair of 100% Copper RCA Cable. 17' - 4 Gauge Translucent Blue SuperFlex Power Cables. 17' - 18 Gauge Blue Remote Cable. 17' - 16 Gauge Clear Speaker Wire. 3' - 4 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7' Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets.
- Model: MM842DVC+dB12+RWK41
Polk Audio MM692
- (2) 6x9 900w 3-Way Car Audio/Marine Speakers+2-Ch Amp+Wire Kit
- Package Includes: (1) Pair of Polk Audio MM692 6x9" 900 Watt 3-Way Car Audio Marine/ATV/Motorcycle/Speakers . (1) Rockville RXA-T1 1500 Watt Peak/750w RMS 2 Channel Amplifier Car Stereo Amp. (1) Rockville RWK81 8 Gauge Complete Wire Kit with 100% Copper RCA.
- 2) Polk Audio MM692 6x9" 900 Watt 3-Way Car Audio Marine/ATV/Motorcycle/Speakers . Driver Compliment: 6" x 9" (152.4 mm x 228.6 mm). Tweeter Compliment: 1" + 3/4" (25mm + 19mm). Cutout Dimensions: 5.63" x 8.42" (143mm x 213.8mm). Mounting Height: 0.3" (7.60mm). Mounting Depth (Top): 3.07" (78mm). Mounting Depth (Bottom): 3.38" (85.8mm). Peak Power Handling: 450 Watts per speaker.
- Rockville RXA-T1 1500 Watt Peak/750w RMS 2 Channel Car Stereo Amplifier . CEA Compliant Power Ratings: . 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N . 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD. RMS Power Ratings . 750 Watts (2 x 375 Watts RMS) @ 2 ohms . 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD.
- Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry.
- Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17 8 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 8 Gauge SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets .
- Model: MM692+RXA-T1+RWK81
Polk Audio DB651 + DB691
- 6" x 9" 3-Way & 6.5" 2-Way Car/Boat/Marine Coaxial Speaker
- Dynamic Balance polymer/mica composite mineral filled cone is stiff yet lightweight for big sound and little distortion
- Marine Certified, perfect for use in marine vessels
- Low-mass 2-Layer 25mm Kapton voice coil former is lightweight for high sound output
- High Pass and Low Pass Crossover Filters
- ABS Grilles, computer optimized and based on exclusive MOMO designs
Polk Audio DB651 + DB6501
- 6.5" 2-Way Component & Coaxial Marine/Car Speaker System
- Removable Phase Plug
- Marine Certified, perfect for use in marine vessels
- Neodymium Magnet Structure
- High Pass and Low Pass Crossover Filters
- U.S. & Euro hole patterns to line up with the mounting screw holes of virtually any vehicle
Polk Audio DB5251
- 5.25-Inch 2-Way Component System
- A single unit 2-way component speaker system
- Equipped with a 5.25-inch polymer/mica composite cone with rubber surround
- Maximum input power: 250 watts
- Equipped with one 1-inch liquid-cooled silk-polymer composite dome tweeter and a neodymium magnet
- Supplied adaptor rings enable a flexible fit for both 6.5 and 6.75-inch applications
Polk Audio DB462
- (2) 4x6 300w Car ATV/Motorcycle/Boat Speakers + Rockmat
- Cut-Out Diameter: 4" x 6" (101.6 mm x 152.4 mm). Height: 0.18" (4.57 mm). Driver Mounting Depth - Bottom Mount: 1.91" (48.6 mm). Driver Mounting Depth - Top Mount: 1.81" (46 mm). Driver Complement Mid / Woofer - Diameter: 4" x 6" (101.6 mm x 152.4 mm).
- Driver Complement Tweeter - Diameter: 0.75" (19 mm). Max Sensitivity: 90 dB. Nominal Impedance: 4 ohm. Total Frequency Response: 50Hz-22kHz. Continuous Power Handling: 50 W. Peak Power Handling: 150 W
- Rockville Rockmat RM2 Sound Dampening Speaker Deadening Kit (2) 12" x 12" Sheets. Easiest installation! Tested to work better than leading brands of sound dampening. Paintable Surface. Speaker kit for (2) speakers (Each speaker requires 2 sheets). Increases SPL - The use of our Rockmat will not only make your sound more clear and eliminate distortion but it will make your music louder by eliminating sound leakage!
- Kill unwanted noise, rattles, vibrations. Aluminum-coated for heat-resistance. 72mil thickness. Increased flexibility. High tack permanent self-adhesive to make your installation quick and easy! Our model has new and improved increased flexibility for an easier installation and top sound quality! Permanent installation with ability to withstand even the highest temperatures! Waterproof material! Our material is very durable. It is waterproof, heat proof and flexible.
- Sticks to any surface. Designed and engineered by Rockville USA! Manufactured with the newest state-of-the-art machinery. We use only the purest raw materials as well! Every product is checked during production for consistency. We have very high quality standards! We use 100% high quality butyl rubber which gives amazing sound insulation and shock absorption (we do not use any asphalt in our product!). Available in both black and silver.
- Model: DB462+RM2
2 x Polk Audio 10" DB+ Series SVC Single Voice Coil 4-ohm Car Audio Subwoofer 1050W
- 2 x Car Audio 10-inch Single voice coil 4-ohm Subwoofer
- RMS Power Handling: 350 watts | PEAK Power Handling: 1050 watts
- Impedance: Single 4 ohms | Frequency Response: 28 - 200 Hz | Sensitivity: 85 dB
- IP56 Ultra-Marine Rated, dirt and water resistant
- Top-mount depth: 4.33" | Cutout diameter: 9.05"
