Kicker car electronics

Brand new Kicker 10ZX1000.1 1,000 watt RMS class "D" mono car amplifier with top mounted controls and free bass remote Features: Kicker 10ZX1000.1 Mono Car Amplifier with 1000w RMS and free bass remote Top mounted controls KICKER Amp's actual power always exceeds its rated power, documented inside each carton Birth sheet with actual tested power included with each amp in the box RMS Power at 2 ohms: 1000 watts x 1 RMS Power at 4 ohms: 500 watts x 1 2 Ohm stable Class "D" fully digital power supply for extreme efficiency and low power consumption Extra efficient mono MOSFET power supply Balanced differential inputs for noise elimination and factory-radio compatibility Boost, gain, and crossover controls are top-mounted for easier access 3 automatic turn-on modes +18dB of boost centered at 40 hertz Optional vinyl skins for personalizing heat sinks available Thermal, voltage, and short circuit protection circuitry Adjustable Low-pass crossover filter (50-200 Hz, 24 dB/octave) Thick heat sink dissipates unwanted heat and keeps the amp cool MOSFET power supply LED power and protection indicators Special technology to eliminate unwanted noise RCA Speaker-level inputs Automatic turn on modes: remote, DC offset, or signal sense Frequency response: 25-20000 Hz Preamp RCA outputs CEA-2006 compliant amplifier Subsonic Filter (24 dB at 25 Hz) Adjustable input sensitivity Fuse Rating: 100A Free bass remote Dimensions: 16 3/4"L x 9-5/8"W x 2-1/8"H 4-gauge power and ground leads recommended

Features

• Kicker 10ZX1000.1 Mono Car Amplifier with 1000w RMS and free bass remote
• RMS Power at 2 ohms: 1000 watts x 1
• RMS Power at 4 ohms: 500 watts x 1
• 2 Ohm stable
• 3 automatic turn-on modes

KS Series Tweeters have always been known for their versatility, and directional installation is the key for best results when enjoying music. With this in mind, KICKER has designed the tweeters to be mounted in one of three ways for optimal sound: flush, surface, or angled. With so many options for your ride, Livin' Loud with high-performance KS-Series Tweeters will deliver on a promise of exceptional musical accuracy and matching looks to go with it.

Features

Neodymium magnet with ferrofluid Includes 12 dB/octave crossover Flush, surface, or angle mounting 4 ohms impedance Flush-mount depth - 9/16 1-year Manufacturer's warranty

High-mass solid pole piece for removing potentially damaging heat High-temp coil wire Cast-aluminum basket with coil-cooling perimeter venting Durable Spiralead tinsel leads Tough double-stitched, Santoprene surround Handy spring-loaded terminalsImpedance (OHMS) 2 or 4 DVCMax Rec Amplifier Power 2000/1000Sensitivity (dB 1w/1m) 91.6Frequency Response (Hz) 18-500

Features

• KICKER's most powerful and advanced round woofer
• Best-sounding, deepest bass from a round woofer
• 2- or 4-Ohm dual voice coil
• One-piece, ultra-rigid SoloKon cone with 360-degree back bracing
• T-cut top plate for wider magnetic field and better sounding bass

High-mass solid pole piece for removing potentially damaging heat High-temp coil wire Cast-aluminum basket with coil-cooling perimeter venting Durable Spiralead tinsel leads Tough double-stitched, Santoprene surround Handy spring-loaded terminalsImpedance (OHMS) 2 or 4 DVCMax Rec Amplifier Power 2000/1000Sensitivity (dB 1w/1m) 91.6Frequency Response (Hz) 18-500

Features

• ZX Series 4-Channel Class AB Car Amplifier
• 4 ohms: 120 watts x 4 chan.
• Frequency response: 20-20000 Hz
• CEA-2006 compliant amplifier
• Dimensions: 20"L x 9-5/8"W x 2-1/8"H

This 10-inch marine subwoofer and grille, with a rugged design and working from inside a legendary sealed KICKER box, gives new meaning to the term “pounding surf.” The SKM10 provides a seawall of bass, though it’s compact enough to mount in tightest of spaces, such as the driver- or passenger-side toe well or in the rear-seat storage area The woofer’s sealed motor assembly and cone make up only part of the enclosure’s outstanding reputation for battling nature’s extreme elements. The sub’s injection-molded cone and basket are UV-treated to reflect harmful solar rays. The tough, molded polyethylene box is designed to be highly water-resistant. And all accompanying hardware and mounting brackets are created from rustproof stainless-steel. KICKER Marine gear meets or exceeds industry standards for environmental humidity and corrosion* and for material degradation due to UV exposure. Also, the SKM10 Sub Box uses the highest available level of magnetic shielding to lessen compass and gauge deviation in the boat’s dash, eliminating any navigational complications.

Features

• Co-molded SoloKon and surround for the harsh marine environment
• Polyimide (Kapton) coil former with Nomex reinforcement for high thermal capability
• Water resistant and magnetically shielded
• Polycarbonate basket
• Sealed speaker connections with locking cover

The Comp comes with serious muscle, including double stitching on the surround, coil-cooling perimeter venting, and flex-killing ISD.

Features

• 12-inch Comp Subwoofer with 4-ohm impedance
• Performs in free-air applications as well as in vented or sealed boxes
• 150 Watts RMS (300 Watts peak) power handling
• 27-500 Hz frequency response
• One-year limited warranty

KICKER introduced a true high-performance subwoofer with a reduced mounting depth a few years back, and it was met with immediate success. Who wouldn't want a subwoofer that pounds insanely from the slimmest locations The next generation of KICKER CompVT Subwoofer slides into door panels and other tight fits. Precise KICKER engineering allows the CompVT to pound with limited space. A special four-layer voice coil provides the CompVT the ability to work with serious amounts of power without the bulk. The woofer's stiff, injection-molded, modified-spoke cone is shaped to provide maximum excursion from a slender basket, allowing the ideal amount of flex for better strength and durability.

Features

Steel clearance adapter plate replaces part of enclosure wall depth to further lessen depth High-temp coil wire Slender, strong steel basket with coil-cooling perimeter venting Durable Spiralead tinsel leads Tough double-stitched surround Special spring-loaded binding posts for minimizing depth Impedance (OHMS) 2 or 4 Max Rec Amplifier Power 400/200 Frequency Response (Hz) 25-350

The KICKER KM6250.2 consists of two 6-inch, boat-ready midrange speakers with removable external crossovers, and a pair of premium one-inch tweeters. It brings marine speaker engineering to the forefront, all while delivering remarkable sound quality. KICKER Marine midrange speakers are engineered using MAXBasket Geometry, providing oversized, louder 6.5-inch cones that perform in speaker baskets designed for a standard 5-inch cutout hole. That means more bang for the buck! Additionally, if depth issues are impeding midrange installation, the external crossovers (2-way, 18dB/octave high-pass and 12dB/octave low-pass at 4kHz) can be conveniently removed from the speakers and mounted nearby, freeing up plenty of working space. The tweeters are designed for flush, surface, or angle mounting. UV treatments on the midranges’ injection-molded cones, Santoprene surrounds, baskets, and grilles help them to last in freshwater or saltwater environments. These speakers can endure most any weather conditions with splash- and spray-resisting sealed motors, cones, and locking terminal covers. And if that weren’t enough, they come packaged with ample wiring for running to the power amplifier in a large vessel. Water-resistant, bolt-thru grilles, with a bold look and easy-to-match metallic color, offer added speaker protection. All hardware is made from rustproof, 316L stainless-steel. KICKER Marine Components meet or exceed industry standards for environmental humidity and corrosion* and for material degradation due to UV exposure. To eliminate confusion within the boat’s navigation system, KICKER uses the highest level of magnetic shielding available to minimize compass and gauge deviation in the dash.

Features

• Magnetically shielded to eliminate interference with sensitive marine electronics
• Santoprene surrounds
• Cone and surround co-molded as single part
• Component crossovers can be mounted to rear of midrange
• Smooth, balanced sound

The KS40 4" 2-way speakers use heavy-duty polypropylene cones supported by Santoprene rubber surrounds. Each speaker sports a 1/2" balanced dome tweeter that broadcasts plenty of high-frequency sparkle, so you'll hear all the sonic details that make your tunes exciting.

Features

Sensitivity - 88 dB Top-mount depth - 1-3/16 Warranty - 1 year

Brand New Kicker 11IX500.4 IX Series 4-Channel 1000 Watts Peak / 500 Watts RMS Class "D" Full Range Car Audio Amplifier with Preamp RCA Outputs Features: Kicker 11IX500.4 4-Channel Car Audio Amplifier RMS Power @ 4 ohms: 75 Watts x 4 Channels RMS Power @ 2 ohms: 125 Watts x 4 Channels Bridged RMS Power: 250 Watts x 2 Channels KICKER's Premium Amplifier Technology Fully Featured in an Ultra-Compact Footprint High-Efficiency Full-Range Class-D Design KickEQTM Boost with variable gain up to 18dB centered at 40Hz Active 50-200Hz variable 12dB/octave XOVER with selectable HiPass, LoPass, or AllPass capability on full-range channels Active 50-200Hz variable 24dB/octave LoPass XOVER on mono channels Automatic turn-on options include: 12 volt remote turn-on, DC offset, and audio signal sensing Differential Hi- and Lo-Level Inputs for integration in any system Advanced protection circuitry: low/high voltage, over-current, and thermal protection with indication on end panel Stackable Design using IXSM and IXSK stacking hardware All feature FITTM Fail-Safe Integration Technology with advanced input design FIT accepts output from virtually any source unit - factory or aftermarket - low signal-level to high speaker-level FIT's isolated inputs reject electrical interference for noise-free operation FIT's three turn-on modes interface with virtually any vehicle's electrical system Remote Bass included: No Length (in / cm): 11-3/8 (28.8) Height (in / cm): 2-3/16 (55) Width (in / cm): 7-7/8 (200) Frequency Response [Hz]: 20-20k, +0/-1dB Input Sensitivity: cHigh level 250mV-10V, low level 125mV-5V Signal-TO-Noise Ratio:

Features

• Kicker 11IX500.4 4-Channel Car Audio Amplifier
• RMS Power @ 4 ohms: 75 Watts x 4 Channels
• RMS Power @ 2 ohms: 125 Watts x 4 Channels
• Bridged RMS Power: 250 Watts x 2 Channels
• KICKER's Premium Amplifier Technology